FingerTec Accessories
FingerTec Accessories Australia
FingerTec offer premium accessories to complement their time and attendance systems. From enclosures to protect your system, to UPS devices to keep your system running during power-outages and additional supplies like RFID proximity cards and key-tags, FingerTec have a range to enhance your system.
Customized to Fit Perfectly
The enclosure sizes are customized to be able
to accommodate our various terminals, with windows and openings for your
fingerprint scanning, USB flashdisk, and WiFi antenna
Providing Transparency
The enclosure is easy on the eyes with the material allowing 92% of visible light through at a thickness of 3mm
Card-friendly
Have you opted for card verification? The
enclosures still allow you to use your card scanning technology with the
"touch and go” concept. No interference involved.
Protect Your Terminal
FingerTec enclosures help protect your terminal
from dust and vandalism. So don’t hesitate to install your terminals
outdoors anymore!
No More Vandalism
Is your FingerTec terminal exposed to damage?
The robust and resistant material of the FingerTec enclosures help
protect against vandals and other physically damaging forces that you
may not foresee.
Robust Material
The enclosures are made of a robust material
that does not fade, discolor or crack easily, and most scratches can be
easily buffed away. It is no wonder this material is used on airplane
windows!
Strong But Light
These protective enclosures are not just hard, but also light. This makes it suitable for mounting in most surfaces.
Simple Installation
Installing these terminals are a piece of cake.
With a mounting plate included, the enclosures come with an DIY
installation guide to make things easy.
FingerTec Adaptec Plus
Enhanced Security with Encrypted Signals
It supports FingerTec encrypted 26-bit Wiegand communication output; providing enhanced security level for extra protection
Prolonged Life Span of Hardware
With data encryption, the life span of the
terminals can be prolonged without the risk of short circuiting when
using AdapTec Plus.
Support Rechargeable Backup Battery
Connects well to any 12V rechargeable backup
battery, providing power to ensure protection of access during any
events of power failure.
Seamless Integration with FingerTec Terminals
Mix and match the FingerTec terminals via
AdapTec Plus for a cost effective access control system suitable for
small and medium sized offices.
Power Up Terminals & Door Lock Systems
A single AdapTec Plus can provide power
simultaneously to a maximum 2 units of FingerTec terminals and 2 sets of
door lock accessories such as the EM Lock and drop bolt in one single
system installation.
Control IN/OUT Terminals At An Entrance
AdapTec Plus is a perfect choice for an IN/OUT installation, where a door is controlled both, at the entrance and the exit.
Alert Emergency with Siren
Compatible with an NC siren type with a maximum
of 0.5A load for emergency event e.g if the terminal is being illegally
dismantled.
DIY Metal Casing for Cleaner Installation
Store an AdapTec Plus and a backup battery in an exclusive FingerTec DIY metal casing, providing a cleaner installation.
FingerTec UPS – Un-interrupted Power Supply
Fingertec’s
UPS will keep your time and attendance clock running in the event of an
power failure. The device is portable and will power your time clock
device for up to 4 hours of operation. The UPS trickle charges during
normal operation of your time clock system with power connected, and
then automatically keeps the time clock powered when mains power is cut.
Key Features:
- 1900mAh
- Output 7 to 8.4vDC 1A
- Charging time less than 3hrs
- Approx 4 hours standby time for time clock device
Dimensions:
L x W x H (mm) : 117 x 48 x 27
FingerTec Proximity Cards & Key-Tags
Fingertec’s proximity cards and key-tags are of high quality and very affordable. Additional proximity cards or key-tags can easily be added to your FingerTec time clocks and access control systems
Key Features:
- RFID Proximity Card, thin type
- RFID Proximity Key-Tag, key-ring type
- HID Proximity Card, thick type
Dimensions:
RFID Proximity Card L x W x H (mm) : 54 x 0.82 x 85
RFID Proximity Key-Tag L x W x H (mm) : 40 x 32
HID Proximity Card L x W x H (mm) : 53 x 1.7 x 85